|
Item
|
Description
|
|
30 Watt Siren
|
The ES30 is an attractive 30 watt electronic siren that physically looks like a P.A. speaker. It usually mounts on radar arches and hardtops. Siren is white and comes with stainless mounting hardware. Dimensions are 4"H x 6"W x 8"D. Part # ES30
|
|
15 Watt Siren
|
The ES15 is a 15 watt electronic siren that is designed to be concealed under gunnels, dashboards and storage areas. Dimensions are 5"H x 5"W x 6"D. Part # ES15
|
|
Siren & Strobe
|
The ES12S combines a loud 104db electronic siren with a bright flashing red strobe into one low profile surface mount enclosure. The ES12S has an internal tamper switch and comes with stainless steel mounting hardware. Dimensions: 2.9" x 4.8" x 1.7". Part # ES12
|
|
Surface Mount Siren
|
The ES10 is a loud 105db single tone electronic siren that is easy to conceal and surface mounts in most areas. The ES10 comes with stainless steel mounting hardware. Dimensions: 2.9" x 4.8" x 1.9". Part # ES10
|
|
7 Watt Siren
|
The ES7 is a 7 watt miniature electronic siren that is easy to hide aboard open boats such as bass and ski boats. It can also be used to compliment the ES30 or ES15 as a second siren, etc. The ES7 measures 1.3"H x 1.3"W x 2"D. Part # ES7
|
|
ES1-W Waterproof Piezo Indicator
|
The ES1-W is a miniature waterproof 83db electronic siren that can be concealed under a gunnel or helm station where the standard ES1 may not survive. The ES1-W provides low volume arm/disarm and DSP calibration chirps instead of using the main siren or LED displays. The ES1-W pulses during entry delays and Deck Sentry mode. It can also be used to compliment the ES30, ES15 or ES7 as a second siren. The ES1-W measures 1.0"H x 1.10"W x 1.0"D. Part # ES1-W
|
|
ES1 Piezo Indicator
|
The ES1 is a miniature 93db electronic siren. The ES1 mounts inside dry cabin areas and is louder than the ES1-W. The ES1 provides low volume arm/disarm and DSP calibration chirps instead of using the main siren or LED displays. The ES1 pulses during entry delays and Deck Sentry mode. It can also be used to compliment the ES30, ES15 or ES7 as a second siren. The ES1 measures 1.0"H x 1.50"W x 0.5"D. Part # ES1
|
|
Siren and Voice Alarm
|
The VSD-N can be used as a pre-warning voice
alarm to alert intruders they have violated
a security system and the authorities have
been notified or as a main alarm siren. To
eliminate false alarms due to accidental
boarding and service personnel, the VSD-N
can be activated by pre-intrusion sensors
such as a transom step deck sensor. If the
intruder disregards the audible warning and
moves further into the boat violating other
sensors such as a cabin door deck sensor,
all sirens engage creating a wall of sound.
The voice module has eight distinctive sound
options. The kit consists of a weatherproof
NEMA3 voice module and a remote fifteen watt
speaker. The voice module comes pre-wired
with four feet of marine wire to connect to
the main alarm system and ten feet of wire
for the remote speaker. If a longer length
of speaker wire is required, the wire can be
ordered separately and shipped installed
from the factory upon request.
Part # VSD-N: Kit includes
voice module and fifteen watt speaker
Part # WP18: 18AWG two
conductor marine wire required to connect
the speaker to the voice module. Specify the
length and order separately.
|
|
Voice Siren Driver and Speaker
|
The VSD-PC provides the same pre-warning
voice and siren options as the VSN-N without
the weatherproof enclosure and marine wire.
Part # VSD-PC
|
